Magnetic (Small Transmitting) Loop Computation.


Some of the formulae behind magnetic loop design are included below. I am grateful to Reg G4FGQ for these. I have used Ln to refer to natural logs because I'm a Sinclair/BBC baby I suppose...

The inductance of a circular loop (L) in microHenrys may be found where:

0.2*P*(Ln(4000*P/d)-2.451)

For a square loop the inductance is smaller for the same perimeter and the value 2.451 changes to 2.853 - the area within the loop being the main variable.

Above a few hundred kHz RF flows in the surface or skin of a conductor - the material for the loop can be hollow tube, or perhaps the outer braid of good quality co-axial feeder.

The reactance of the loop in Ohms where:

X = 2 * Pi * F * L

and the tuning capacitor setting in pico-farads is calculated:
=1000000/(2*pi*f*x)

.

The radiation resistance of the loop is

31171 ( PI to the fourth power x 320 ) multiplied by the Area squared (A*A), divided by the Wavelength to the fourth power (W**4)

Rr = PI **4  x 320  x  A x A  /  W **4> </p>



<ul>

    <li>Where A is the area enclosed by the loop in square metres</li>

    <li>W is wavelength in metres</li>

</ul>



<p>For multiple turns N, multiply the above by the square of the

number of turns (N squared). </p>



<h4>The HF loss resistance of the loop in Ohms is</h4>



<p><img src=

Radiating power efficiency of the loop is

Eff   =  Rrad / (Rrad + Rloss)

In terms of decibels relative to a loss-less antenna,

Loss=4.343*Ln(1/Eff)

The above formulae apply only to small loops with perimeters not greater than 1/5 of a wavelength. They do not apply accurately to loops near to the ground, at a height less than about half a loop diameter, because heavy loop currents induce currents in the ground in a manner similar to electric induction-heating furnaces. This power loss is represented by an additional loss resistance inside the loop. Reg. G4FGQ

Email GW0TQM
email me
Carl GW0TQM's Magnetic loop page
Contributions comments and STL links welcomed.


Magloop home What? Using Building BASIC Software Links More reading and reports

Sign the Magloop Guestbook Get your own FREE Guestbook from htmlGEAR View the magloop Guestbook